Operating rules for deoxidizing and deburring instrument brass accessories by environmental protection magnetic polishing machine

Instrument brass fittings are often used in instrument production, it belongs to one kind of instrument parts. There are many manufacturers of instrument parts. Instrument manufacturers often consider the smooth reflective surface of brass fittings without burr when choosing brass fittings. Therefore, after the instrument brass fittings are processed, the surface often needs to be oxidized to deburr.

Deoxidizing and Deburring instrument brass fittings can be better used in instrument production. So instrument brass fittings how to go oxidizing layer deburring? This is a common problem in many instrument brass fittings manufacturers. Today, Guanguu Technology will introduce to you the operating procedures of the environmental protection magnetic polishing machine for the removal of oxidation layer and deburring of instrument brass accessories.

The picture below shows the actual shot of instrument brass fittings, which is a small flat brass part with irregular shape. It can be seen that the surface problems of instrument brass fittings are quite obvious. The surface is black and has burr, which needs to be deoxidized and deburred.

In order to remove the blackness and burr on the surface of instrument brass fittings, the Guogu environmental protection Magnetic Polishing machine is used to deoxidize and deburr the instrument brass fittings:

1. Pour water into the groove of the environment-friendly magnetic polishing machine, which can drown the brass fittings of the instrument;

2. According to the size of instrument brass fittings, select the appropriate magnetic needle, and use the magnetic needle to remove the oxidation layer and deburr the instrument brass fittings;

3. Pour the polishing liquid to increase the metal luster on the surface of instrument brass accessories;

Four, put the instrument brass accessories sample:

5. Instrument brass fittings are being deoxidized and deburred;

According to the workpiece size and material of instrument brass fittings, wait for the corresponding time. After the completion of deoxidizing layer and deburring of instrument brass fittings, remove the surface moisture of instrument brass fittings. The following is the effect of deoxidizing layer and deburring of instrument brass fittings, the surface of instrument brass fittings is smooth and metallic.

The surface blackness and burrs on instrument brass fittings have been removed. The surface of brass fittings is smooth and reflective without burrs, restoring the metallic color of instrument brass fittings:

This irregular shape flat brass small parts are handled well, the above is the instrument brass accessories to oxidize layer deburring operating procedures, need to remove the workpiece surface black and burr need polishing manufacturers welcome to consult, thank you for your support for the Guan ancient environmental protection magnetic polishing machine.